Panelartâ LP Thermo fused Melamine Board

Rexcel can offer identical surfaces on both Panelart® HP and Panelart® LP.

Panelartâ LP decorative panels consist of a melamine resin-saturated decorative paper, thermally bonded under heat and pressure to a substrate such as industrial grade particleboard. Durability is built right into the sheet. Panelartâ LP decorative panels are highly resistant to stains, scratches, abrasion, chip-out, burnishing, steam, and radiant heat. Panelartâ LP performs like high pressure decorative laminate at a fraction of the cost.

bulletThickness’ ranging from 1/8" to 1-1/4".
bulletSizes - 4’x6’, 4’x8’. 5’x8’ in white only.
bulletAll sheets are exact size. Panelartâ LP does not come oversized.
bulletAvailable in a decorative finish either one or two sides. One side finish has natural kraft paper backer on opposite side.
bulletGlossy or Matte finish for most colors, wood grains and patterns.
bulletDecorative finishes for Panelartâ LP can be matched to either Panelartâ HP or Panelartâ HI laminates.
bulletMeets M-2 particleboard specifications.

Recommended Uses: For internal use in the manufacturing of kitchen cabinets, furniture, shelves, fixtures, partitions, displays, wall units, lifestyle furniture’s and many other products.

Panelartâ LP conforms to the relevant standards of the American Laminators Association (ALA)

 

Panelart.net is brought to you by: PlasticsOnLine & The Matrix Network, Inc.
Copyright © 1996-2004 [PlasticsOnLine]. All rights reserved.
 cgs@PlasticsOnLine.com