|
|
LOW PRESSURE LAMINATE TYPESThere are low pressure laminates with plain or decorative
paper on one or both sides. Laminates that only have decorative
paper on one side can have kraft paper on the back impregnated
with melamine resin. Thickness available are 6mm, 9mm,
12mm,16mm, and 19mm in nominal dimensions of 1.22 by 2.44 meters. ApplicationsApplications for this product are endless on furniture
vertical surfaces and partition screens according to the final
use of the finished product. As a structural panel, low pressure
laminates are an assembling element in the manufacturing of a
finished product and only requires an appropriate cutting, drill,
and grooving technique in order to simplify and increase the
manufacturing of almost all kinds of furniture There are several types of low pressure laminates depending on the kind of paper used in lamination. Front side with back side. One design sheet on the front side and one backer sheet on the back side. Front side without back side. One design sheet on the front side and no pressed sheet on the back, only natural particle board. Both sides. One design sheet on the front side and one design sheet on the back
|
|
Panelart.net is brought
to you by: PlasticsOnLine & The Matrix Network, Inc.
|